Dixon 3000 Series User Manual download pdf (Page 34)

TROUBLESHOOTING

MOWER CUT QUALITY:

There are many variables that can effect the cut quality of any riding mower. Type and

conditions of grass, cut height setting, engine RP M and ground speed are some of the variables

that interact creating differences in cut quality. Examination of one or more of the above will

generally produce a quality cut.

The Troubleshooting Chart suggests practices and adjustments that may be helpful i n

improving cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.

SITUATION CAUSES REMEDY

Poor cut quality

Ground speed Reduce mowing speed

Poor cut quality

Loose engine to

Refer to Page 24

mower deck belt

Poor cut quality

Engine RPM too low Increase engine RPM to maximum

Poor cut quality

Dull or bent blade Sharpen or replace as required

Poor cut quality

level mower deck Consult your d

ealer

Poor cut quality

Grass buildup under Clean out underside of mower deck

mower deck

Poor cut quality Improper blades Replace with original equipment

blade designed for the 3000 Series

Models

Poor cut quality

Uneven tire pressures

Check and adjust as required per

operators manual

Page31

1 2 ... 29 30 31 32 33 34 35 36 37 38

No comments

Dixon 3000 Series User Manual Page 34