Dixon 4500 Series User Manual download pdf (Page 39)

CARE AND MAINTENANCE

CHANGING THE ENGINE OIL:

1. The “Dapco” oil drain valve is located on the left

side of the engine crankcase (Model 4515B &

4518K) and on the right side of the engine

crankcase (Model 4516K).

2. Place a suitable container under the drain valve.

The fitting of a short piece of hose will help direct

the oil.

3. To drain, turn hex head valve stem counter--

clockwise with a 10mm wrench or socket. Open

to full open (approximately 7 turns).

4. After engine is drained, tighten hex stem.

NOTE: Refer to engine manufacturer’s recommendations

for frequency of oil changes.

CAUTION

HOT oil may cause burns. Allow engine to cool before

draining oil.

Hex Head Valve Stem

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

No comments

Dixon 4500 Series User Manual Page 39