Dixon ZTR 4421 Operator's Manual download pdf (Page 25)

CARE AND MAINTENANCE - 4000 SERIES MODELS

This portion of the 400 0 Series Models owners manual deals with normal service items which can be

performed by the owner. Please remember that if you are in doubt as to the correct service procedures

to be followed, these and other service situations can be handled by a Dixon ZT R dealer who is familiar

with the service of your mower.

MAINTENANCE SCHEDULE:

To insure a long and trouble free service life on all the components used on the 4000

Series Models, a regular and thorough maintenance schedule should be followed. The

following items should be checked after the first (10) hours of operation and on a weekly

basis, or each (40) hours of use:

1. Drive Chain

2. Drive system, belts and controls.

3. Mower deck belts. .

4. Tire pressures.

5. Tightness of all nuts and bolts.

6. Battery fluid level.

7. Engine Oil.

Before performing any maintenance,

Shut off engine, allow to cool.

ENGINE: For engine operating and maintenance information, refer to the engine operating and

maintenance instructions furnished by the engine manufacturer, supplied with each

mower.

BATTERY:

Check the fluid in the battery at frequent intervals.

Keep fluid level above the plates in each cell, using distilled water.

OFF-SEASON BATTERY STORAGE:

Identify each cable so cables can be reconnected to correct

terminals.

Disconnect cables from terminals

ALWAYS disconnect ground cable first and reconnect last

Charge battery.

DO NOT remove battery from mower.

Clean top of battery and terminals with baking soda and water.

Page 22

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 38 39

No comments

Dixon ZTR 4421 Operator's Manual Page 25