Dixon SPEEDZTR User Manual download pdf (Page 14)

Speedztr 42 & Speedztr 36

Chassis: 11 gauge steel welded frame assembly

Body: All body parts made of high density polyethylene. Dent and

corrosion resistant.

Mower Deck: 36” Deck: 11 GA fabricated construction-36” cut width

42” Deck: 13 GA stamped steel construction-42” cut width

Blade Drive: Electric clutch.

Transmission: Each rear wheel is independently driven by a Hydro Gear

EZT hydrostatic drive.

Engine:

Speedztr 42: 15.5 HP Briggs & Stratton Intek, single cylinder, overhead

valve, air cooled, gasoline, vertical shaft with cast iron

cylinder, pressure lube with spin-on filter.

Speedztr 36: 14.5 HP Briggs & Stratton Intek, single cylinder, overhead

valve, air cooled, gasoline, vertical shaft with cast iron

cylinder, pressure lube with spin-on filter.

Starting System: Electric-key switch operation w/safety interlock blade drive.

Tires: Front - 11 x 4.00-5 ribbed tread (16-21 PSI)

Rear (42)-18 x 8.50 x 8 - 4 ply turf tread (8-14 PSI)

Rear (36)-18 x 6.50 x 8 - 4 ply turf tread (8-14 PSI)

Capacities: Fuel 3 gallons

Engine Oil 1.5 quarts

Dimensions: Width 40” maximum track width

Height 40” to top edge of seat

Length 72” hitch tab to front bumper

Weight 475 lbs

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

SPECIFICATIONS

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

No comments

Dixon SPEEDZTR User Manual Page 14