Dixon SPEEDZTR User Manual download pdf (Page 36)

CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

1. Place mower on a smooth, level surface and

check tire pressures to insure correct stance.

Tires should be inflated as follows.

Front: 16 - 21 lbs

Rear: 8 - 14 lbs

2. Turn each outer blade tip to align with the deck

in a side to side manner.

3. Measure from the floor surface up to thebottom

of the blade tip on the discharge side of the

mower. Retain this measurement. Move to the

opposite side and check to see if that

measurement is the same. If adjustment is

required, turn nut on one or both of the rear

L-rods until both measurements are equal.

4. Turn each outer blade tip to align with the deck

in a front to rear manner.

5. Measure from the floor surface up to the bot-

tom of the blade tips at both the front and rear

of the blades. Rear of blade tips should be to

1/8" to 1/4" higher than the front of blade tips.

If adjustment is necessary, turn nut on front L-

rod.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

No comments

Dixon SPEEDZTR User Manual Page 36