Dixon ZTR 4423 Operator's Manual download pdf (Page 22)

OPERATION INSTRUCTIONS

SIDE DISCHARGE OF THE CLIPPINGS:

In order to achieve optimum performance when side discharging

the grass clippings, please read and follow the tips listed below.

Additional information can be found in the troubleshooting guide.

CAUTION Be sure that the deflector is properly

installed on the discharge chute.

1, Set engine speed control to the wide open or full

setting.

2. Do Not Attempt To Cut Grass When It Is Wet.

Wet grass will clog the underside of the deck

and discharge area.

3. If the grass is tall, place the mower deck cut

height lever in the top or second notch. Initially

overlap cutting swaths instead of a full swath

with each pass. Some applications may

require a second cutting.

4. Keep The Underside Of The Mower Deck Clean.

Frequent removal of dried grass and dirt will

allow the clippings to discharge correctly.

5. Maintain Sharp Blade(s) Throughout The Cutting

Season.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

No comments

Dixon ZTR 4423 Operator's Manual Page 22