34
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1. The Dapco oil drain valve is located on the left
side of the engine crankcase.
2. Place a suitable container under the drain valve
hose.
3. To drain, turn hex head valve stem counter--
clockwise with 10mm wrench or socket. Open
to full open (approximately 7 turns).
4. After engine is drained, tighten hex stem.
5. Change the oil filter.
6. Fill with oil (see steps on next page).
NOTE: Refer to engine manufacturers recommendations
for frequency of oil changes.
HOT oil may cause burns. Allow
engine to cool before draining oil.
CAUTION
Hex Head Valve Stem
Comments to this Manuals