Dixon ZTR 5424 Operator's Manual download pdf (Page 33)

OPERATION

Husqvarna-33

Manual Transport

When pushing or pulling the mower, engage the

ZT-2800 (Integrated Zeroturn Transaxle) bypass

linkages. The ZT-2800 bypass linkages are located on

the rear of the frame, below the rear engine guard.

Raise the deck into the highest cutting position.1.

Pull the ZT-2800 bypass linkages up and out of 2.

the keyhole slots. Release the levers with the

head outside the frame and held in the bypass

position.

To reengage the ZT-2800 to drive, reverse the 3.

above procedure.

Load the machine into truck or trailer by driving up

ramps in low gear. DO NOT LIFT! The machine is not

intended to be lifted by hand.

8058-032

Bypass linkage, ZT-2800 engaged

8058-032

Bypass linkage, ZT-2800 locked in the bypass position

WARNING!

Make no adjustments without:

the engine stopped,•

the ignition key removed,•

the parking brake activated•

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 72 73

No comments

Dixon ZTR 5424 Operator's Manual Page 33