Dixon ZTR 5424 Operator's Manual download pdf (Page 42)

MAINTENANCE

42-Husqvarna

Fuel Filter

Replace the line-mounted fuel lter every 100 hours

(once per season) or more regularly if it is clogged.

Replace the lter as follows:1.

Move the hose clamps away from the lter. Use 2.

at-nosed pliers.

Pull the lter loose from the hose ends.3.

Push the new lter into the hose ends. Position the 4.

lter with the “FLOW” arrow pointing up toward the

fuel pump. If necessary, a soap solution can be

applied to the lter ends to ease mounting.

Move the hose clamps back toward the lter.5.

8011-468

Fuel lter

Fuel Pump Air Filter

Regularly check that the fuel pump’s air lter is free

from dirt.

Remove the screws and open the pump, no hoses

need be removed.

The lter can be cleaned with a brush if necessary.

Replace the lter on the console.

8009-147

Fuel pump air lter

8009-181

Remove dust

Tap the paper lter against a xed surface to 1.

remove dust. If the paper lter is still dirty, it

must be replaced.

To ret lter:

Check that the seal on the bottom of the paper 1.

lter is whole.

Mount the paper lter in the air lter housing 2.

and tighten the wing nuts.

Ret the pre-lter on the paper lter.3.

Replace the cowling over the air lter housing. 4.

Do not over tighten the plastic fastener.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 72 73

No comments

Dixon ZTR 5424 Operator's Manual Page 42